What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Loctite Epoxy Plastic Bonder-Old Product
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaLoctite Epoxy Plastic Bonder is an acrylic formula that is specially formulated to bond and repair plastic surfaces. The convenient double syringe dispenses equal amounts of each component every time. When mixed in equal volumes, the components react to produce a tough, rigid, high strength bond in 20 to 25 minutes. Loctite Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents and shop fluids. It has high impact resistance and can be sanded and drilled
Purpose of product.
Usage: Plastic AdhesiveStructure such as solid, liquid, aerosol etc.
Form: pasteDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 2024200 Elm Street
Stamford, CT CT 06902
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :March 25, 2008 Date when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
MSDS Verified :March 10, 2011 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2* 3 1 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : 2.86
-
Warnings
Avoid contact with eyes, skin and clothing. Avoid breathing vapor and mist. Wash thoroughly after handling. During use and until all vapors are gone: Keep area ventilated - do not smoke; extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition. Make sure containers are properly grounded before use or transfer of material.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. For safe storage, store at or below 32 degrees C (90 degrees F). -
Acute health effects
From MSDS:
Hazards Identification
Emergency Overview: Flammable liquid and vapor. Causes eye, skin and respiratory tract irritation. May cause allergic skin reaction. May be harmful if swallowed.
Routes of Exposure: Eye contact, Skin contact, Inhalation, Ingestion
Inhalation: Vapors may cause headaches, nausea, dizziness and respiratory tract irritation.
Skin contact: Irritating to skin. May cause allergic skin reaction.
Eye contact: Vapors may irritate eyes. Contact with eyes will cause irritation.
Ingestion: May be harmful if swallowed. Ingestion causes irritation and effects similar to inhalation.
Existing conditions aggravated by exposure:Eye, skin, and respiratory disorders. -
Chronic health effects
From MSDS:
No information provided. -
Carcinogenicity
Components of this product are listed as carcinogens by IARC, NTP and OSHA.
-
Handling information
Avoid contact with eyes, skin and clothing. Avoid breathing vapor and mist. Wash thoroughly after handling. During use and until all vapors are gone: Keep area ventilated - do not smoke; extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition. Make sure containers are properly grounded before use or transfer of material.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. For safe storage, store at or below 32 degrees C (90 degrees F). -
Disposal information
Dispose of according to Federal, State and local governmental regulations.
-
California Prop. 65 Warning
This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
-
First Aid
Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.
Skin contact: Wash with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Get medical attention if symptoms occur.
Eye contact: Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. Get medical attention.
Ingestion: Do not induce vomiting. Keep individual calm. Obtain medical attention.
-
CoC List
UN Global Harmonization Classification
